|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IDT74ALVC162344 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS FEATURES: DESCRIPTION: IDT74ALVC162344 * 0.5 MICRON CMOS Technology * Typical tSK(o) (Output Skew) < 250ps * ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) * VCC = 3.3V 0.3V, Normal Range * VCC = 2.7V to 3.6V, Extended Range * VCC = 2.5V 0.2V * CMOS power levels (0.4 W typ. static) * Rail-to-Rail output swing for increased noise margin * Available in SSOP, TSSOP, and TVSOP packages This 1-bit to 4-bit address driver is built using advanced dual metal CMOS technology. The ALVC162344 device is used in applications in which four separate memory locations must be addressed by a single address. The ALVC162344 has series resistors in the device output structure which will significantly reduce line noise when used with light loads. This driver has been designed to drive 12mA at the designated threshold levels. DRIVE FEATURES: * Balanced Output Drivers: 12mA * Low Switching Noise APPLICATIONS: * 3.3V high speed systems * 3.3V and lower voltage computing systems FUNCTIONAL BLOCK DIAGRAM OE1 1 2 8 6 O E3 1B 1 36 5A 29 34 5B 1 1A 30 1B 4 41 5B 4 9 14 13 2B 1 42 6A 6B 1 2A 37 2B 4 6B 4 OE2 28 16 OE4 3B 1 43 7A 20 56 48 7B 1 3A 15 44 3B 4 23 21 27 7B 4 4B 1 8A 49 55 8B 1 4A 4B 4 51 8B 4 The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE 1 (c) 1999 Integrated Device Technology, Inc. JANUARY 1999 DSC-4642/2 IDT74ALVC162344 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE PIN CONFIGURATION OE1 1B 1 1B 2 ABSOLUTE MAXIMUM RATINGS(1) Symbol Description Max VTERM(2) Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Continuous Clamp Current, VI < 0 or VI > VCC Continuous Clamp Current, VO < 0 Continuous Current through each VCC or GND -0.5 to +4.6 -0.5 to VCC+0.5 -65 to +150 -50 to +50 50 -50 100 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 OE4 8B 1 8B 2 Unit V V C mA mA mA mA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 VTERM(3) TSTG IOUT IIK IOK ICC ISS GN D 1B 3 1B 4 GND 8B 3 8B 4 VCC 1A 2B 1 2B 2 VCC 8A 7B 1 7B 2 GND 2B 3 2B 4 2A 3A 3B 1 3B 2 GN D 7B 3 7B 4 7A 6A 6B 1 6B 2 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC. CAPACITANCE (TA = +25C, F = 1.0MHz) Symbol CIN COUT COUT Parameter(1) Input Capacitance Output Capacitance I/O Port Capacitance Conditions VIN = 0V VOUT = 0V VIN = 0V Typ. 5 7 7 Max. 7 9 9 Unit pF pF pF GND 3B 3 3B 4 4A GN D 6B 3 6B 4 5A NOTE: 1. As applicable to the device type. VCC 4B 1 4B 2 VCC 5B 1 5B 2 PIN DESCRIPTION Pin Names OEx xA xBx Data Inputs 3-State Outputs Description 3-State Output Enable Inputs (Active LOW) GN D 4B 3 4B 4 GN D 5B 3 5B 4 OE2 OE3 SSOP/ TSSOP/ TVSOP TOP VIEW FUNCTION TABLE(1) Inputs OEx L L H NOTE: 1. H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High-Impedance Outputs xA H L X xBx H L Z 2 IDT74ALVC162344 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = -40C to +85C Symbol VIH VIL IIH IIL IOZH IOZL VIK VH ICCL ICCH ICCZ ICC Parameter Input HIGH Voltage Level Input LOW Voltage Level Input HIGH Current Input LOW Current High Impedance Output Current (3-State Output pins) Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = 2.3V, IIN = -18mA VCC = 3.3V VCC = 3.6V VIN = GND or VCC One input at VCC - 0.6V, other inputs at VCC or GND VCC = 2.3V to 2.7V VCC = 2.7V to 3.6V VCC = 2.3V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V VCC = 3.6V VCC = 3.6V VI = VCC VI = GND VO = VCC VO = GND Test Conditions Min. 1.7 2 -- -- -- -- -- -- -- -- -- Typ.(1) -- -- -- -- -- -- -- -- -0.7 100 0.1 Max. -- -- 0.7 0.8 5 5 10 10 -1.2 -- 40 V mV A A A A V Unit V Quiescent Power Supply Current Variation -- -- 750 A NOTE: 1. Typical values are at VCC = 3.3V, +25C ambient. OUTPUT DRIVE CHARACTERISTICS Symbol VOH Parameter Output HIGH Voltage VCC = 2.3V VCC = 2.7V VCC = 3V VOL Output LOW Voltage VCC = 2.3V to 3.6V VCC = 2.3V VCC = 2.7V VCC = 3V Test Conditions(1) VCC = 2.3V to 3.6V IOH = - 0.1mA IOH = - 4mA IOH = - 6mA IOH = - 4mA IOH = - 8mA IOH = - 6mA IOH = - 12mA IOL = 0.1mA IOL = 4mA IOL = 6mA IOL = 4mA IOL = 8mA IOL = 6mA IOL = 12mA Min. VCC - 0.2 1.9 1.7 2.2 2 2.4 2 -- -- -- -- -- -- -- Max. -- -- -- -- -- -- -- 0.2 0.4 0.55 0.4 0.6 0.55 0.8 V Unit V NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = - 40C to + 85C. 3 IDT74ALVC162344 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE OPERATING CHARACTERISTICS, TA = 25C VCC = 2.5V 0.2V Symbol CPD CPD Parameter Power Dissipation Capacitance Outputs enabled Power Dissipation Capacitance Outputs disabled Test Conditions CL = 0pF, f = 10Mhz Typical 68 12 VCC = 3.3V 0.3V Typical 82 14 Unit pF SWITCHING CHARACTERISTICS(1) VCC = 2.5V 0.2V Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ tSK(O) tSK(b) Parameter Propagation Delay xA to xBx Output Enable Time OE to xBx Output Disable Time OE to xBx Output Skew(2) Output Skew(2) -- -- -- -- -- -- -- -- -- -- 500 350 ps ps 1 5.4 -- 4.7 1.2 4.5 ns 1 6.4 -- 6.6 1.2 5.7 ns Min. 1 Max. 4.9 -- VCC = 2.7V Min. Max. 5.1 VCC = 3.3V 0.3V Min. 1.4 Max. 4.4 Unit ns NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = - 40C to + 85C. 2. Skew between any two outputs of the same package and switching in the same direction. For tSK(O), OUTPUT1 and OUTPUT2 are any two outputs. For tSK(b), OUTPUT1 and OUTPUT2 are in the same bank of the same package; this parameter is guaranteed but not production tested. 4 IDT74ALVC162344 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE VIH VT 0V VOH VT VOL VIH VT 0V ALV C Link TEST CIRCUITS AND WAVEFORMS TEST CONDITIONS Symbol VLOAD VIH VT VLZ VHZ CL VCC(1)= 3.3V0.3V VCC(1)= 2.7V 6 2.7 1.5 300 300 50 VCC 500 Pulse Generator (1, 2) SAME PHASE INPU T TRAN SITION VCC(2)= 2.5V0.2V 2 x Vcc Vcc Vcc / 2 150 150 30 Unit V V V mV mV pF VLOAD Open GND tPLH OU TPUT tPLH OPPOSITE PHASE INPU T TRAN SITION tPHL 6 2.7 1.5 300 300 50 tPHL Propagation Delay ENABLE CON TROL IN PUT tPZL DISABLE VIN D .U .T. VOUT VIH VT 0V VLOAD/2 VOL + VLZ VOL VOH VOH - VHZ 0V ALV C Link tPLZ VLOAD/2 VT tPHZ VT 0V RT 500 CL ALVC Link Test Circuit for All Outputs DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. NOTES: 1. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2.5ns; tR 2.5ns. 2. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2ns; tR 2ns. OUTPU T SW ITCH NOR MALLY CLO SED LOW tPZH OU TPUT SW ITCH NORMALLY O PE N H IGH NOTE: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH. VIH VT 0V VIH VT 0V VIH VT 0V VIH VT 0V ALVC Link Enable and Disable Times SWITCH POSITION Test Open Drain Disable Low Enable Low Disable High Enable High All Other Tests Switch VLOAD GND Open VIH INPU T VT 0V VOH OUTPUT 1 VT VOL VOH OUTPUT 2 tPLH2 tPHL2 ALVC Link DATA INPUT TIMING INPU T ASYNC HRON OU S CON TROL SYNC HRON OU S CON TROL tSU tH tREM tSU tH Set-up, Hold, and Release Times tPLH1 tPHL1 LOW -H IGH -LOW PULSE tW HIGH-LOW -HIGH PULSE VT tSK (x) tSK (x) VT ALVC Link VT VOL Pulse Width tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1 Output Skew - tSK(X) NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank. 5 IDT74ALVC162344 3.3V CMOS 1-BIT TO 4-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION IDT XX ALVC X XX Family XXX Device Type XX Package Temp. Range Bus-Hold PV PA PF 344 162 Shrink Small Outline Package Thin Shrink Small Outline Package Thin Very Sm all Outline Package 1-Bit to 4-Bit Address Driver with 3-State Outputs Double-Density with Resistors, 12mA Blank 74 No Bus-Hold -40C to +85C CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com for Tech Support: logichelp@idt.com (408) 654-6459 6 |
Price & Availability of IDT74ALVC162344 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |